January 01, 2016
Living Room Bose Stereo
Enjoy your own music played directly from your personal Bluetooth enabled device on the living room Bose Stereo.
Here’s how:
On the Bose Stereo (in the cabinet below the TV):
1. Using the Bose Wireless Remote Control,
power the stereo on.
2. From the Bose Wireless Remote,
select Auxilary (AUX).
On the Bose Bluetooth Audio Adapter (on the cabinet top):
The Bluetooth Logo on top of the device should be blinking blue or solid white.
Blinking Blue = Ready to pair/connect
Blinking White = Connecting
Solid White = Connected
On your Bluetooth enabled device:
1. Open/Start Bluetooth.
2. Select Bose Bluetooth Audio Adapter from the
list of devices (on an iPhone it should show up under
Other Devices). Note: If prompted, Enter passcode 0000.
3. Allow to pair, then violà!...You’re ready to play your music!
ENJOY!
January 01, 2016
Bedroom iHome Bedside Clock Radio
Enjoy your own music played directly from your personal Bluetooth enabled device on the iHome Bedside Clock Radio
Here’s how:
1. Open/Start Bluetooth on your Bluetooth-enabled
device. (iPhone, iPod, Samsung, Android etc.)
2. Press the ihome logo Button on top of the iHome Clock
Radio to turn it on.
3. Press and release the Mode Button (on the top left/
front of the clock radio) as needed until the
Bluetooth indicator icon appears on the clock
radio’s LED front display, on the far right middle of
the display.
4. Press and hold the EQ/Pairing Button on the top
of the iHome clock radio (far left button on the
second row of buttons) for 2 seconds to begin
pairing the clock radio with your device.
The Bluetooth icon will flash on the front display,
indicating pairing attempt. “iHome iBN97” should
appear on your device’s menu.
If “Not Paired”, “Not Connected” or similar message
appears on your device, select “iHome iBN97” on your device
to connect it. If your device asks for a password,
enter 1234 on the keyboard of your device.
If no device is paired within 1 minute, a tone will
sound and the unit will revert to its previous mode.
To retry pairing, turn the unit OFF then back ON,
then follow steps 2 - 4 again.
5. Once paired with your device, the Bluetooth indicator
on the front display will stop flashing and will remain on
and violà!... You’re ready to play your music! ENJOY!